Home Products How-to Shopping Cart FAQ About Us Contact Us Affiliates

Follow FingerTech_Bots on Twitter
Find FingerTech Robotics on Facebook

Login Status  Login Status

Not logged in

» Login

Shopping cart  Shopping cart
0 Product(s) in cart
Total 0.00 CAD
» Checkout

Customer Map
Customer Map

Mailing List

Solution Graphics
0 Product(s) in cart |
Total 0.00 CAD |

Home » Categories »

 Checkout
FingerTech Blade Hub

Product Details 

FingerTech's Blade Hub is the best way to attach a blade to a shaft.  It uses a flange nut to hold the blade tightly, meaning you can use off-the-shelf sawblades without needing to drill screw holes into hardened steel!  Custom blades can be made stronger by not having those same mounting screw holes.


• The stepped design allows use of blades with different bore sizes (10mm, 16mm (5/8in), and 20mm).

• A clamp mount with two screws attaches the hub to your weapon motor shaft. (Remember to apply thread-lock.) (This replaces the 8-32 setscrew in the previous version.)

• The hub has a 6-32 threaded hole so that your horizontal spinner robot can rest on a screw head and not be pulled in different directions when the blade spins. Also useful for supporting the hub's far side in vertical spinners.

Price: 20.72 CAD
15.58 USD 14.08 EUR
-
+
Add to cart

FingerTech Foam Wheels (pair)
Based on 4 ratings. (View)

Product Details 

• High-quality neoprene foam tires mated with our popular Twist Hubs give you a lightweight, shock-absorbing, high-traction solution for transferring power to the ground.

• Unlike hobby airplane wheels, the diameter will always be accurate and the material won't change between batches.

• Diameters from 25.4mm-76.2mm (1.0in-3.0in) in 6.35mm (0.25in) increments.

• Widths of 12.7mm and 19.1mm (0.5in and 0.75in)

• Wheels sold in pairs.


Price: 4.28 CAD
3.22 USD 2.91 EUR
-
+
Add to cart

Snap Ring Pliers - 1mm (0.038in) tips
Based on 1 ratings. (View)

Product Details 

Note: Snap Hubs are being replaced by our new and improved Twist Hubs.  We've ordered one last batch for people to buy spares, but we will not be carrying Snap Ring Pliers anymore so Snap Hubs are not recommended for new projects.

• Our Snap Hubs use a snap ring with small 1mm (0.039in) holes.  Since pliers for these aren't as common as the 1.5mm (0.051in) tips, we are stocking some for your convenience!


Price: 7.66 CAD
5.76 USD 5.21 EUR

FingerTech Snap Hubs (pair)
Based on 4 ratings. (View)

Product Details 

Note: Snap Hubs are being replaced by our new and improved Twist Hubs.  We've ordered one last batch for people to buy spares, but we will not be carrying Snap Ring Pliers anymore so Snap Hubs are not recommended for new projects.

• Foam wheels are the preferred choice for combat robots because they absorb impacts and save your drive motors from stripping teeth!

• Combine with our FingerTech Foam Wheels, or if you already have Lite Flites (or their thinner counterpart Lectra Lites) they can be used with Snap Hubs too!

• With Snap Hubs, you can easily and securely mount these foam tires to your robot.

• The foam tire is held tightly by a custom washer, and features a recess to keep the snap ring from getting hit by weapons.

• The hub is secured to the motor shaft by a strong 8-32 setscrew.

• Available with 3mm and 4mm shaft bore, but can be drilled out as big as 6.35mm (0.25in).

• Make sure to choose the correct Thin/Wide size to match your wheels.


Bore
3mm
4mm
Width
0.50in (Lectra Lites)
0.75in (Lite Flites)
Price: 15.32 CAD
11.52 USD 10.41 EUR
-
+
Add to cart

FingerTech Twist Hubs Key

Product Details 

• This polycarbonate key will let you lock and unlock your FingerTech Twist Hubs without scratching the anodized surface.

• Shaped to allow motor shafts to protrude through the wheel.


Price: 2.70 CAD
2.03 USD 1.84 EUR
-
+
Add to cart

FingerTech Twist Hubs (pair)
Based on 1 ratings. (View)

Product Details 

• Foam wheels are the preferred choice for combat robots because they absorb impacts and save your drive motors from stripping teeth.

• Use Twist Hubs to mount our FingerTech Foam Wheels, or if you already have Lite Flites (or their thinner counterpart Lectra Lites) they can be used with Twist Hubs too!

• With Twist Hubs, you can easily and securely mount these foam tires to your robot.

• The foam tire is held tightly by a custom locking washer, which must be pressed in and turned 90 degrees to release.

• The hub is secured to the motor shaft by a strong 8-32 setscrew.

• Available with 3mm and 4mm shaft bore, but can be drilled out as big as 6.35mm (0.25in).

• Make sure to choose the correct Thin/Wide size to match your wheels.


Bore
3mm
4mm
Width
0.50in (thin)
0.75in (wide)
Price: 16.22 CAD
12.19 USD 11.03 EUR
-
+
Add to cart

FingerTech Urethane Sumo Wheel (single)
Based on 8 ratings. (View)

Product Details 

• By popular demand, we have brought our experience from molding mini-sumo wheels into larger Sumo Wheels!

• Our high-traction polyurethane is molded in four sizes around a machined and anodized aluminum hub.

Hardness
Shore A20
Shore A45
Enlarge Bore/Keyway?
No change (3mm bore)
Enlarge Bore (enter size below) (+2.00 CAD)
1/2" Bore, 1/8" Keyway (+6.00 CAD)
 (Leave empty if not enlarging)
Price: 16.22 CAD
12.19 USD 11.03 EUR
-
+
Add to cart

FingerTech Mini-Sumo Wheels (pair)
Based on 6 ratings. (View)

Product Details 

• Want to be at the top of the minisumo class but your robot's wheels keep slipping?  Look no further!
• Top-quality competition wheels made from high-traction polyurethane and injection-molded hubs.

Price: 22.07 CAD
16.59 USD 15.00 EUR
-
+
Add to cart

FingerTech Mecanum Wheels (Set of 4)
Based on 1 ratings. (View)

Product Details 

• FingerTech's Mecanum Wheels allow any robotics enthusiast to add omni-directional capabilities to their creation.


• The new upgraded version is all-metal construction for maximum strength.


• Precision engineered aluminum hubs and rubber rollers with a customizable mount for any motor shaft size between 3mm - 6mm (0.118" - 0.25").


• Set includes four competition-grade wheels (two "A" side and two "B" side), a 1/16 hex wrench, and instructions for installing and controlling the wheels.

Price: 94.59 CAD
71.11 USD 64.30 EUR
-
+
Add to cart

FingerTech Single Mecanum Mount

Product Details 

• If you will be mounting your Mecanum Wheels on different robots or replace the motors and need a different shaft bore size, you will want to pick up some extra mounts.

• Bore is 3mm, can be drilled out to accommodate up to 1/4" shafts.

• Includes 6-32 setscrew

• Four holes tapped for 4-40 standoffs

• Available in aluminum and delrin.


Material
Plastic (Delrin)
Metal (Aluminum)
Price: 1.58 CAD
1.19 USD 1.07 EUR
-
+
Add to cart

FingerTech Lite Hubs (pair)
Based on 9 ratings. (View)

Product Details 

• Lite Hubs press into Lite Flite and Lectra Lite foam wheels (hobby aircraft wheels found at most hobby stores), providing a secure and very lightweight method of mounting a wheel onto a motor shaft.
• Mount wheels onto any 3mm shaft  (Can be drilled out for 1/8" motor shafts)
• A setscrew secures the hub to the shaft.  Don't ever glue your wheels to your motors again!
• Don't be intimidated by the low price - Lite Hubs are a great way to attach these common foam wheels to a 3mm shaft.
Price: 4.95 CAD
3.72 USD 3.36 EUR
-
+
Add to cart



Best Selling Items (Last 60 days):

Valid XHTML 1.0 Transitional
Home - Products - How-To - Shopping Cart - FAQ - About Us - Contact Us - Affiliates
Client Login - Terms & Conditions - Privacy Policy - Site Map